Hybrid Nest Air Core, M (100 x 100 mm)

Sizes XS, S, M, L and XL

£14.99 £11.99

Black Friday / Cyber Monday sale, ends Sun 6 Dec

Lid


A horizontal nest for colonies that have outgrown a test tube. The base holds a water reservoir that keeps the nest damp, so the ants can choose wet or dry. Sizes M, L and XL come with a mesh lid with a red feeding plug, so air gets in and ants stay in, and a transparent lid as well. If you would rather have no lid, choose No lid and the top is solid clear acrylic instead. XS and S have no lid; the top is solid clear acrylic. Clear acrylic on top keeps the colony in view.

Details

  • Water reservoir
  • M, L and XL come with a mesh lid with feeding plug and a transparent lid (or choose no lid)
  • Clear acrylic top
XS 80 x 50 mm
S 120 x 50 mm
M 100 x 100 mm
L 100 x 200 mm
XL 200 x 200 mm
With both lids AK-HNA-S1 £11.99
No lid (solid clear acrylic top) AK-HNA-S1-NL £11.99

Built into every nest

Ants on the floor of one chamber of a small white nest, a square mesh panel beside them and a round white bung in the feeding chamber at the right

A colony in an Air Core XS

A small colony living in an Air Core XS. This is a single chamber nest, designed for small species. Start a colony in the size that suits it now.

The base of a Hybrid Nest Air Core with its red fin cassette sitting in its well, outlined in yellow, beside the empty fill well

What the fins do

Under the mesh floor of each wet chamber sits a cassette of thin, closely spaced fins, standing in the water from the reservoir. The gaps between them are narrow enough that water climbs them, the way it climbs a paper towel. That turns the water into a wet surface far larger than the surface of the reservoir, and the water evaporates from it into the chamber. The wet chamber fills with humid air while the dry end stays dry. The fins touch the underside of the mesh above them, so the mesh stays damp as well.

A close-up of a wet chamber in a Hybrid Nest Air Core with its removable mesh insert fitted, a fine square grid in a rectangular opening

The mesh floor: the trampoline

Above the fins is the floor of the wet chamber: a mesh we call the trampoline. It lets the humid air up from the fins and holds the colony clear of the water, which stays beneath it. The ants walk on it, with moisture rising through it from below. The mesh lifts out on its own.

A Hybrid Nest Air Core taken apart on a wooden table: the base with its red fin cassette and fill well, the mesh insert lying beside it and the nest top at the left

Antimicrobial, and they lift out

Still water in a humid nest is where slime and mould like to start, and the fins sit in it. So the fins and their cassette are made from an antimicrobial material. The cassette lifts out as one piece and the mesh above it lifts out separately, so either can be washed or replaced without touching the rest of the nest.

The Hybrid Nest Air Core from above with the red top off, showing its four chambers and the mesh lid with its red feeding plug

Mesh lid and feeding plug

Sizes M, L and XL come with a mesh lid with a red feeding plug, so air gets in and ants stay in, and a transparent lid as well. Take the plug out, put the food in, push it back: you never have to open the nest to feed. If you would rather have no lid, choose No lid and the top is solid clear acrylic instead. XS and S have no lid; the top is solid clear acrylic.

The Hybrid Nest Air Core from above with its red top on and a tube joined on the left

Removable red dust cover

A transparent red cover sits over the nest and keeps the dust off. Lift it off to see the colony in full colour.

Looking down into a nest from above: three white chambers with floors shaped into contour-line ridges, terraces and hollows, a red shutter tab in the wall of the right-hand chamber and a mesh panel at the bottom right

Every nest has a landscape of its own

No two nests are the same. The ridges, terraces and columns on the chamber floors are made for each nest we build, and for each one you download from our Makers section.

A close-up of a chamber floor with ridges and terraces, a small square port opening in the wall and a shutter tab at the corner, with the mesh lid at top left

Port shutters, hidden under the bezel

Colonies grow, and the ports are how the nest grows with them. Each expansion port has its own sliding shutter, and it sits under the bezel, so with the bezel on there is nothing to catch, flick or slide open by accident. Lift the bezel to open a port when the colony is ready for an arena or a second nest, and close it again when it is not. The ports take our sawtooth connectors and tubing.

The corner of a Hybrid Nest with the bezel off, showing the channels along the edge for the heater cable and temperature sensor, and the tube connector

Warm end, dry end, damp end

A channel through the base takes a heater cable, and it runs under the dry end, so with a heater fitted the dry end is the warm end and the water stays at the wet end. A second channel takes a temperature sensor, so you can read the temperature instead of guessing. The heater and sensor are not included.

Stainless steel fixings, out of sight

The acrylic top is held down with stainless steel M3 screws, and the bezel covers them, so no fixings show.

Anti-vibration feet

Four soft feet under the base stop the nest creeping and take up vibration from the surface it stands on.

STL files

The STL files for the Hybrid Nest Air Core are coming soon. Download them and pay what you want.