Joiners and Connectors manual

Download the PDF

  1. The tubing connector (barbed end and sawtooth end) next to the joining connector (sawtooth end at both sides).

    Tubing connector and joining connector.

  2. Tubing pushed over the barbed end of the tubing connector.

    Push the tubing over the barbed end.

  3. The sawtooth end of the tubing connector pushed into the sawtooth socket in the nest.

    Push the sawtooth end into the sawtooth socket.

  4. Two nests pushed together with the joining connector between them.

    The joining connector links two nests directly.

  5. A hand lifting the bezel off a nest; inset shows the shutter slide between the X and O marks.

    Nests with shutters: lift the bezel, open the port.